User's Manual

SKBL 56 A1
US-EN │ 13 ■
Device does not turn on.
♦ The integrated battery is not charged.
Charge the battery (see section Charging the speaker).
No sound.
♦ The volume on the device or the playback device is set to mute.
Increase the volume on the device or on the playback device.
♦ Playback has not been started on the playback device. Start playback on
the playback device.
The two speakers will not connect to each other.
♦ The speakers are not in pairing mode. To change this, press and hold the
button and the button ( )of one of the speakers
for about 2 seconds until you hear a beep. Wait a moment until the speak-
ers have connected to each other.
If you cannot solve the problem with the above-mentioned solutions, please
contact the service hotline (see Warranty section).
Cleaning
► To avoid irreparable damage to the device, ensure that moisture cannot
penetrate the device during cleaning.
► Do not use caustic, abrasive or solvent-based cleaning materials. These can
damage the surfaces of the device.
♦ Clean the housing of the device with a lightly moistened cloth and a mild
detergent only.
Storage when not in use
♦ Store the device in a location which is clean, dry, dust-free and not in direct
sunlight.
♦ To ensure long battery life, charge the battery at regular intervals.
IB_282774_Bluetooth_SKBL56A1_LB9.indb 13 16.01.17 11:28