User's Manual

SKBL 56 A1
12 US-EN
If you connect a 3.5 mm (0.14") jack cable to one of the speakers during
Bluetooth
®
operation, the speaker will automatically switch to playback
from the connected device.
Automatic switch-off
If the 3.5-mm (0.14") jack socket is not in use or their is no playback via
Bluetooth
®
, the speakers automatically switch off after about 10 minutes.
The operating/charging LED
will go out and you will hear a beep.
Any existing Bluetooth
®
connection will be terminated.
Press and hold the
button for about 4 seconds to turn a speaker
back on.
The automatic turn-off function does not work while the speakers are charging.
Troubleshooting
If you cannot pair the speakers to a compatible Bluetooth
®
music device,
proceed as follows:
Make sure that the Bluetooth
®
function is activated on the music device.
When a device is connected via a 3.5-mm (0.14") jack cable, the
Bluetooth
®
function is deactivated.
Ensure that the speaker is turned on.
If you use several music devices, ensure that any previous connection is
disconnected (see section Function of the buttons for music playback).
There may be a previously paired device within range.
Make sure that the speakers are no more than 32 ft from the Bluetooth
®
device and each other. Make sure that there are no barriers or electronic
devices placed between them.
IB_282774_Bluetooth_SKBL56A1_LB9.indb 12 16.01.17 11:28