User's Manual

SKBL 56 A1
US-EN │ 11 ■
■ Speak into the device microphone to make your call.
■ You can switch the audio source at any time via your smartphone. To do so,
please follow the operating manual of your smartphone.
■ After finishing the call, the playback of the audio file will be continued auto-
matically.
Functions of the buttons
Depending on the smartphone used, not all functions described will be
available.
Function
button
Accept call Press once (for incoming call).
End call Press once (during call).
Reject call
Press and hold for approx. 2 seconds (for incoming
calls).
Call last-dialled
number
Press 2 times
AUX IN mode
You can also listen to music from an audio device connected via a 3.5mm (0.14")
jack cable
. Stereo operation is not possible in AUX IN mode. An existing
Bluetooth connection is terminated.
♦ Make sure that both speakers are turned off.
♦ Press and hold the
button for about 2 seconds to turn a speaker
on. You will hear a beep and the operating/charging LED
will flash
orange und blue.
♦ Use a 3.5 (0.14") mm jack cable
to connect the audio device to the
3.5 mm (0.14") jack socket (AUX IN)
of the speaker.
♦ Start playback on the audio device and set the volume to a moderate level.
♦ Then set the desired volume using the
button or the button
on the speaker.
♦ Press the
button if you want to mute the speaker.
IB_282774_Bluetooth_SKBL56A1_LB9.indb 11 16.01.17 11:28