User's Manual

SFS 52 B2
■ 16 │ US - EN
Synchronizing the transmitter and
receiver
The transmitter and receiver of this wireless
doorbell system can communicate with each
other via a number of different codings. This
means that you can operate up to 5 transmit-
ters with one receiver. In addition, you can
expand the wireless doorbell system with any
number of receivers. However, this is only
possible if the transmitter and receiver within
a system are working on the same frequency.
For this, you must synchronize the devices as
follows:
♦ Press the synchronization button 6 on
the receiver.
♦ Now press the doorbell button 8 on the
transmitter.
If the synchronization is successful, the receiver
notifies you of the programmed call signal.
Should the receiver not react as described,
repeat the synchronization.
IB_289974_SFSS2B2_LB9.indb 16 25.08.17 09:30