User's Manual

SilverCrest SBTH 4.1 A1
18 -
As soon as the previously connected device comes into range of the
headphones, the connection is automatically made. In some cases, you have to
confirm the connection on your device.
Connecting the headphones to two Bluetooth
®
devices
You can connect the headphones simultaneously to two Bluetooth
®
devices. If
you have already connected one device to the headphones, proceed as
follows to connect another device:
 Power off the headphones and deactivate the Bluetooth
®
function of the
first device.
 Power on the headphones again and connect to the second device. To do
this, follow the previous section “Connecting the headphones.“
 After making the connection, activate the Bluetooth
®
function of the first
device. The connection between the headphones and the first device is
made automatically.
Wired headphone use
As an alternative, you can also connect the headphones (A) to your audio
source using the supplied 1/8 in. (3.5 mm) auxiliary audio cable (C). To do
this, plug one end of the 1/8 in. (3.5 mm) auxiliary audio cable (C) into the
1/8 in. (3.5 mm) jack (9) and connect the other end to your audio source. In
wired use, the headphones act like headphones without Bluetooth
®
and can
also be used when the battery is drained. Now control the volume directly at
your audio source. In this mode, the buttons on the headphones (A) do not
work.