............................................................................................................. 2 V 1.
SilverCrest SBTH 4.1 A1 Table of Contents Important Safety Instructions ................................................... 4 Safety ....................................................................................... 6 Trademarks ............................................................................ 12 Intended use........................................................................... 12 Items included ........................................................................ 13 Technical data.
SilverCrest SBTH 4.1 A1 Congratulations! By purchasing the SilverCrest SBTH 4.1 A1 Bluetooth® headphones, referred to as the headphones in the following text, you have chosen a high-quality product. The headphones make it possible for you to listen to music from your smartphone or music player without wires. Their light construction provides you with great wearing comfort and crystal-clear sound while interfering noise is greatly eliminated.
SilverCrest SBTH 4.1 A1 Important Safety Instructions Read the instruction manual in its entirety before starting the device. Keep the device away from children. Do not use the device if damaged. Only use the device according the instructions contained in this manual. Do not use in tropical regions. Keep the instruction manual in a safe place. Safety Alert Symbol This is the safety alert symbol. It is used to alert you to risk of personal injury.
SilverCrest SBTH 4.1 A1 Meaning of signal words WARNING indicates a risk or hazard that, if not avoided, could result in death or serious injury. CAUTION indicates a risk or hazard that, if not avoided, could result in minor or moderate injury. NOTICE indicates a situation which could lead to damage to property. Take care when using headphones. Listening for a long time at high volume could damage your hearing. Before you use the headphones, set the volume to minimum.
SilverCrest SBTH 4.1 A1 Terminology As used in this instruction manual in general and with regard to safety information, safety notices, and warnings in particular, the following words have the following means: May: This word is understood to be permissive. Shall: This word is understood to be mandatory. Should: This word is understood to be advisory. Safety IMPORTANT SAFETY PRECAUTIONS Always observe the following safety precautions: Risk of explosion! Do not throw the device into fire.
SilverCrest SBTH 4.1 A1 Children and people with disabilities Keep the device away from children under the age of eight and people with restricted physical, mental, or sensory abilities. Keep children away from the device. Risk of small parts being swallowed, resulting in the risk of serious injury or death. Keep the plastic bags away from children. Risk of suffocation! The device and packaging material are not toys and should be kept away from children.
SilverCrest SBTH 4.1 A1 Keep the device at least 8 in. away from a pacemaker or an implanted defibrillator. When wireless components are switched on, do not place the device in the vicinity of flammable gases or in a potentially explosive environment (for example, paint shop). Risk of explosion or fire. Risk coming from too high a volume Take care when using headphones. Listening for a long time at high volume could damage your hearing. Do not use your headphones with the volume set too high.
SilverCrest SBTH 4.1 A1 other situations that require your complete attention. The sound could distract you or cause you to miss what is happening around you. Obey the regulations and laws of the country of use. Cables Always lay the cables plugged into the device in such a way that nobody can stand or trip on them. Risk of injury! Maintenance If the device is damaged, send or bring it in for repairs by an authorized technician.
SilverCrest SBTH 4.1 A1 Do not use the device if defective until it has been checked by a technician. All repair work should only be carried out by qualified technicians. Cleaning Clean the device using a clean, dry cloth only. Do not use corrosive liquids. Never open the housing of the device, as this will void your guarantee. Please note the following: Protect the device from intense heat or artificial light, sunlight and open fire. Do not expose the device to shock, vibration, or force.
SilverCrest SBTH 4.1 A1 allow it to come into contact with heat or sharp surfaces. Do not place foreign objects into openings on the device. Do not place the device close to magnetic fields (for example, other speakers). Do not expose the device to major temperature fluctuations. If this occurs, wait for approximately two hours to start the device. The radio waves transmitted can cause static noise in hearing aids.
SilverCrest SBTH 4.1 A1 Trademarks The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by TARGA GmbH is under license. Other trademarks and the trade names are those of their respective owners. USB is a registered trademark. Other names and products can be the trademarks or registered trademarks of the corresponding owners. Intended use These headphones are a consumer electronics device and are used to reproduce music at a suitable volume.
SilverCrest SBTH 4.1 A1 Items included Take the headphones and accessories from the packaging and completely remove all packaging materials. Make sure that you have received all items. Report any missing parts immediately to the Service department. A B C D SilverCrest SBTH 4.1 A1 Bluetooth® headphones USB charging cable 1/8 in. (3.
SilverCrest SBTH 4.1 A1 Technical data Operating voltage 5V Rechargeable battery Li-Po, 3.7 V Battery capacity 400 mAh Bluetooth® specification v4.1 Profile support A2DP, AVRCP, HSP, HFP Frequency range, headphones 20 Hz – 20 kHz Range, Bluetooth® operation Up to 400 inches Charging time About 3.
SilverCrest SBTH 4.1 A1 Operating environment The headphones are not designed to operate in rooms with a high temperature or humidity (for example, bathrooms) or those with a large amount of dust. Operating temperature and operational humidity: 23°F to 113°F (-5°C to +45°C); max. 85% relative humidity Copyright All contents of this user manual are copyrighted and are provided to the reader as an information source only.
SilverCrest SBTH 4.1 A1 Before using Charging the battery Before you start using the device or if the built-in battery is drained, do the following: Connect the USB charging cable (B) to the USB charging connection (7) and to an unused USB port of your powered computer or a USB power adapter (not included). The LED (8) is orange while charging. Once the battery is completely charged, the LED (8) turns blue.
SilverCrest SBTH 4.1 A1 First use Powering the headphones on/off Power the headphones on by pressing the ▸ll button (2) for about 4 seconds. The LED (8) now flashes orange indicating Standby mode. With the headphones are being powered on for the first time and they have never been connected to a device before, Pairing mode starts automatically. In Pairing mode, the LED (8) flashes blue and orange alternately. See the next section for connecting your device.
SilverCrest SBTH 4.1 A1 As soon as the previously connected device comes into range of the headphones, the connection is automatically made. In some cases, you have to confirm the connection on your device. Connecting the headphones to two Bluetooth® devices You can connect the headphones simultaneously to two Bluetooth® devices.
SilverCrest SBTH 4.1 A1 Wearing the headphones To wear the headphones correctly, pay attention to the writing on the inside of the headband (1) directly over the speaker (6): R = right, L = left. The buttons and the LED (8) are on the right side. You can change the size of the headband (1) by pulling the speaker (6) out of the headband (1) a bit or pushing it back into the headband (1) again. This ensures maximum wearing comfort.
SilverCrest SBTH 4.1 A1 Making calls You can make calls with the headphones if you have connected the headphones to a cell phone.
SilverCrest SBTH 4.1 A1 Deleting the connection list The headphones save the devices last connected in a connection list. You can delete this connection list as follows: Start the Pairing mode as described in the section “Connecting the headphones.” The LED (8) flashes blue and orange alternately. Press the ▸ll button (2) briefly twice. The LED (8) stops flashing and the connection list is deleted. A beep sounds and the LED lights up violet briefly.
SilverCrest SBTH 4.1 A1 Troubleshooting You cannot power on the headphones Charge the battery. There is no beep when Bluetooth® connects Power on the headphones. Try to connect the headphones again to your device. A Bluetooth® connection is not made Check whether the Bluetooth® function of your device is active. The distance between the headphones and your device is too large, get closer. Remember that a Bluetooth connection is broken as soon as a 1/8 in. (3.
SilverCrest SBTH 4.1 A1 Disposing of used devices Do not dispose of used devices together with household waste! If at any time in the future you should not use this device anymore, please dispose of it in compliance with the applicable regulation in your state or country. This ensures professional recycling of used devices and excludes negative consequences for the environment. Make sure that the disposal is in compliance with local regulations and EPA recommendations (www.epa.gov).
SilverCrest SBTH 4.1 A1 cause interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device interferes with radio or television reception, which can be determined by turning the device off and on, the user is encouraged to resolve this issue by carrying out one or more of the following measures: Readjust or relocate the receiving antenna. Increase the distance between the device and receiver.
SilverCrest SBTH 4.1 A1 Tampering with the product (such as removing cover, unscrewing screws etc.) What is the period of coverage and warranty resolution? The warranty is for 3 years from the date of purchase. At our discretion, product will either be refunded or replaced. What will we not do? We will not: Start a new warranty period upon product exchange; We will not repair product.
