User's Manual

22
Envir onment Mode
The Environment Mode settings allows you to select the power line frequency used at the location
of WAPP camera. The power line frequency varies depending on geographic region. It may cause
image icker if wrong frequency is selected. Please check with local authorities for proper setting.
There are two type video color tone, user can change the video color tone between warm-
yellow(indoor) and cool-white (outdoor)
Low Light Enhancement
The Low Light Enhancement Mode is for improving the night view video image by providing 5 levels
to select from (5 = brightest).
WI-FI SETTING
The Wi-Fi setting allows you to choose the wireless connection and setup the Wi-Fi environment.
When you tap the “Manage Wi-Fi network” button, the system automatically scans the nearby
network and shows the available Wi-Fi routers in the drop-down list. Choose the appropriate Wi-Fi
router and enter the Wi-Fi router password if necessary. Due to security concerns, it is suggested
to use the WPA/WPA2/ WPA2-PSK protocol for Wi-Fi network.
Note:
1. When the Wi-Fi connection is completed and you unplug the Ethernet cable, the camera
will reboot and it will take several minutes to establish the connection. Please re-launch
the APP when you see the green signal indicator lights up.
2. The WAPP camera is designed to work with the legal Wi-Fi channels in your region.
Please refer to your Wi-Fi router manual to choose an appropriate channel for WAPP
camera.
3. If camera fails to connect to the Wi-Fi router, please hold down reset button for 2
seconds to reset the system and repeat register process again.