User's Manual
19
ADVANCED SETTING
This chapter explains the advanced settings for administrator. Administrator is the one who owns
the administration password and has the full control to the WAPP camera. The administrator can
access all WAPP functions and settings, while general users can receive the surveillance images
for live view/screen capture/video recording and may not manage the camera settings.
Admin Password The security code required to enter Advanced Setting for system setting
management.
Email Alert Enable / Disable receiving E-Mail alert (after system detecting motion)
on your mobile divice. Please make sure you have setup the E-Mail
Setting correctly and have activated Motion Detection function.
Time Zone Setup the appropriate time zone .
Daylight saving Turn ON/OFF the daylight saving function.
Device Security Code The password required for remote access.
Video Setting Congure the video quality and local power frequency.
Wi-Fi Setting Manage your Wi-Fi Network.
Sensitivity Setting Setup the camera sensitivity for motion detection.
Email Setting Setup your email account for E-mail alert .
SD Card Format Format/Setup the SD card.
Prole Setting Save the current camera settings and apply the settings to other
cameras.
Device Information Check the App and API Kernel version.
Note:
It may take more than one minute for some routers to update the registered
devices. When you complete advanced settings and return to device list, please wait for
a while allowing your router to nish the camera registration.