User's Manual

SETUP PIN LOCK

If you enable PIN Lock, the user will be asked to enter the PIN code when you launch the APP.

1. Enable the “Enable lock when starting” function. Then enter your PIN code.

2. Conrm your PIN code again.

NOTIFY (PUSH NOTIFICATION)

The WAPP camera supports motion detection function. When any event is detected in the camera

site, you’ll receive push notication on the mobile devices for the event recognized by the camera.

For iOS

If you want to enable/disable it, please follow the steps on your iOS mobile device:

1. Launch Settings from your Home screen.

2. Tap Notications.

3. Scroll down to nd “OMGuard HD” APP and tap on it.

4. Switch the toggle to ON/OFF in Notication Center.

Note:

If you forgot your PIN code, please uninstall the APP and reinstall it on the mobile device.

Note:

It takes time for the changes to take effect in iOS, normally within 2 hours.

(iOS) (Android)