Wireless APP Camera Installation and Operating Instructions Model: WAPP-MS Version 1.0 PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT AND KEEP THIS MANUAL FOR FUTURE REFERENCE.
The state of art WAPP camera is capable of deliver high quality Digital High Definition (HD) video to your smart-mobile device(s), which would require higher internet bandwidth. Due to your local internet environment condition, your mobile device(s) may display black-screen or temporary disconnect to the WAPP camera. * Make sure the WAPP camera is operating with sufficient internet bandwidth, 1Mbps (upload/ download speed) is suggested.
CONTENTS Introduction..................................................................................................... 2 Wireless Devices Operating Range ...........................................................................2 Important Safety Precautios ......................................................................................2 Kit Content....................................................................................................... 4 Safety and Installation Tips...............
INTRODUCTION PLEASE READ BEFORE YOU START Always use discretion when installing CCTV equipment, especially when there is perceived policy. Enquire relevant local regulations applicable to the lawful installation of video recording/ surveillance. Third party consent may be required. WIRELESS DEVICES OPERATING RANGE I Ensure the signal reception viewed from the wireless camera(s) is the best possible reception between the camera(s) and the Wi-Fi router.
FCC Compliance Statement: This Products with CE Marking comply device complies with Part 15 of the with EMC Directive (2014/30/EU); FCC rules. Operation is subjected to Low Voltage Directive (2014/35/ the following two conditions: (1) this EU); RED (2014/53/EU); ROHS device may not cause harmful interference, and (2) this Directive (2011/65/EU) issued by the Commission device must accept any interference received, including of the European Community.
KIT CONTENT Wireless App Camera Splitter Cable x1 x1 Camera Antenna Power Adapter x1 x1 Screw Pack Quick Start Guide x1 x1 Tools Required: ‧Electric drill ‧5mm masonry drill bit ‧15mm masonry drill bit ‧No. 2 Philips screwdriver Mounting Template x1 For best system performance: - iOS: iPhone5 / iPad2 / Mini iPad with iOS 7.0 or above. - Android: 1.5G dual core processor dual core procesor with 1G Ram or above. - Storage: Class 10 memory card.
SAFETY AND INSTALLATION TIPS Do not attempt to open the units with the power adaptor plug connected to avoid any risk of personal injury. When installing CCTV camera(s), always follow manufacturer's advice when using power tools, steps, ladders, etc. and wear suitable protective equipment (e.g. safety goggles) when drilling holes. Before drilling holes through walls, check for hidden electricity cables and water pipes. The use of cable/pipe detector is advisable.
CAMERA OVERVIEW Antenna Light Sensor LENS RJ45 Cable SD Card Slot Reset Button Note: Press and hold the reset button on the power cable for 5 seconds and the system will start the reset process. The system will restore to factory default and you may start the Wi-Fi setup.
SETUP YOUR CAMERA Follow the instructions below to help configure your camera for initial use. 1. APP download Download and install the "OMGuard HD" app from Google PlayTM ot the App Store®. Then launch the app. For iOS For Android 2. Power up the camera Connect your smartphone to your home netwotk. Connect camera to the Wi-Fi router using Ethernet cable. Power on the camera, which will take 40 seconds to connect to the router. When its done, green LED will stay ON.
3. Add a new camera 1. Tap "+" to add a new camera. 2. Tap "search" button to search available camera(s) which connecting to the Wi-Fi router, or scan the QR code label on the back of the camera to bring up the DID information. 3. Name your camera and enter the default password 123456. Later, app will request you to modify default password to private password. (iOS) (Android) 4.Wi-Fi Setting setup In the Wi-Fi setting section, enter default password:123456.
INSTALL YOUR CAMERA 1. The best location is close to proximity of power outlet that the power cord can reach. 2. Stick the mounting template onto the wall, eave or roof. For concrete, brick or plywood siding, use 6.3mm (1/4") drill bit to drill 3 pilot holes and insert anchors. 3. Use 16~20mm (5/8") drill bit to drill cable hole through the wall. If the wall is thick, you may need to drill another hole in the interior. 4.
APP INTRODUCTION Main Page The MAIN PAGE section offers user an overview for all registered camera(s), including camera status (connected/disconnected). User can quickly access the camera(s) in the list. When multiple cameras are registered, scroll down to locate the registered camera for access. (iOS) (Android) The ADD CAMERA icon allows you to register additional camera(s) to the system. The system supports up to 3 concurrent user connections.
Tap the CAMERA SETTING icon. The following icons appear on the panel. (iOS) (Android) Tap the ADVANCED SETTING icon to setup camera configuration. (Please refer to "Advanced Setting" for detail). Tap the DELETE icon to remove the camera connection. Tap the EVENT LIST icon to check or playback the recorded events. (Please refer to "Playback Your Video" for detail). The INFORMATION icon allows you to enable PIN lock, push notification function and check the App information.
SETUP PIN LOCK (iOS) (Android) If you enable PIN Lock, the user will be asked to enter the PIN code when you launch the APP. 1. Enable the “Enable lock when starting” function. Then enter your PIN code. 2. Confirm your PIN code again. Note: If you forgot your PIN code, please uninstall the APP and reinstall it on the mobile device. NOTIFY (PUSH NOTIFICATION) The WAPP camera supports motion detection function.
Note: The internet connection and wireless network interference may influence the performance of push notification service.
LIVE VIEW / SNAPSHOT / RECORDING Tap to take snapshot image(s) of the video. The captured snapshots will be stored in your mobile device. Tap to turn ON/OFF the volume. Tap to Start/Stop recording. The recorded video file will be stored in the memory card of your camera. Tap to return to the main page. The APP allows users to have access to live video. User can take snapshot image(s) and record the live video.
VIEWING YOUR SNAPSHOTS For iOS You snapshots will be named with the time stamp and saved into the Camera Roll location of your mobile device. For Android You snapshots will be named with the time stamp and saved into the Photo Gallery > snapshot folder on your mobile device. PLAYBACK YOUR VIDEOS The recorded video file(s) on your camera is automatically saved to the memory card inserted in your camera. You can remotely access the file(s) for playback via your mobile device.
Tap EVENT LIST icon and the Date-Time filter would appear. User may define the period for system to display all available recorded file(s) for playback. During the playback, tap the PAUSE icon to pause / resume the video. MUTE to deactivate/ activate the audio function and tap the BACK icon to return to the event list section. You may also review recorded video file(s) with your PC. For best performance, please use “Free Video Converter” from http://www.freemake.
To Download / Delete the video file(s) in the EVENT LIST section, please follow the steps below: ‧DOWNLOAD Long press the video clip to download the file onto your movbile device. Note: During the download process, the system will stop both the live view and recording functions. APP will automatically inform any user accessing the camera that the system is busy and the connection has been terminated.
This function helps user to easily withdraw the recorded file(s) from the memory card. It is strongly suggested to download the file(s) at your home Wi-Fi network (WLAN), meaning the mobile device(s) is connecting to the same Wi-Fi router as the camera. Minimum bandwidth requirment is 1Mbps (upload/ download). Download process may be force stopped if the bandwidth becomes too slow and cannot continue. Note: For iOS system, please use "Oplayer Lite" APP for playback downloaded video files(s).
ADVANCED SETTING This chapter explains the advanced settings for administrator. Administrator is the one who owns the administration password and has the full control to the WAPP camera. The administrator can access all WAPP functions and settings, while general users can receive the surveillance images for live view/screen capture/video recording and may not manage the camera settings. Admin Password The security code required to enter Advanced Setting for system setting management.
ADMIN PASSWORD The Admin Password is a specific security code for administrator to change the advanced settings. The default admin password is 123456. Please use this function to change the default admin password into your personal admin password. For the protection of your system configuration, every time you change the advanced settings, you need to enter the admin password. Please change the admin password periodically.
TIME ZONE The drop-down list shows the world time zone. Select the time zone that will work the best for you. If your date/time is during the daylight saving time period, please check the Daylight Saving box to adjust the system time properly. DAYLIGHT SAVING Activate/Deactivate the daylight saving function. DEVICE SECURITY CODE The Device Security Code is a specific security code to access the camera. The default password of the camera is 123456.
Envir onment Mode The Environment Mode settings allows you to select the power line frequency used at the location of WAPP camera. The power line frequency varies depending on geographic region. It may cause image flicker if wrong frequency is selected. Please check with local authorities for proper setting.
SENSITIVITY SETTING This defines the camera parameter for motion detection. Detection Mode PIR is hardware-based biomass detection. SOFTWARE use advance software analysis to trigger motion alarm. In general, the performance of any PIR depends on the environment, specially the temperature. At low temperature the accuracy of PIR may suffer. If you are experiencing such, please switch to the built-in software motion detection to improve the situation.
SD CARD SETTING Formatting your memory card will ERASE all the data from it and you will not be able to get the data back. Please back up your video files BEFORE formatting the memory card. Note: The system is optimized to Class 10 memory card. Memory card with lower specification will decrease the recording and playback function efficiency. During format process, all recording & viewing will stop until format process completes.
TROUBLE SHOOTING IF SOLUTION The APP cannotfound the camera ‧ Make sure your network supports the DHCP protocol. ‧ Make sure the camera and your mobile device connect to the same Wi-Fi router for the first setting. ‧ Make sure the Wi-Fi router is activated. ‧ Make sure the camera is properly powered on. ‧ Use the “ADD CAMERA” function to manually add the camera. Wi-Fi router is not shown in the drop down list ‧ Make sure SSID broadcasting function is enabled in the WiFi router.
The APP cannot record any video clips ‧ Make sure the SD card has been correctly inserted ‧ Make sure the motion detection function has been enabled. (please refer to the Sensitivity Setting section). ‧ Please format the SD card when it is used for the first time (please refer to the SD Card Format section) ‧ Make sure you are using Class 10 rated memory card. Email alert is not working ‧ Make sure the email alert function is enabled (please refer to the Email Alert section).
Wrong data and time are shown ‧ Wrong date and/or time will result in unexpected record schedule. Make sure you’ve selected the correct time zone (please refer to the Time Zone section). ‧ Confirm the system date/time of the mobile device to ensure correct operation. ‧ System will clock itself when connect to the internet. Make sure the system is connected properly to the internet. You may use your mobile device to access the system to see if remote view is f unctioning properly.
PRODUCTION SPECIFICATION Networking Parameter Wireless Technology IEEE 802.
STORAGE MEDIA MANAGEMENT Micro SD Card Capacity (Class 10) Event Minutes 8G 400 180 32G 1600 320 64G 3200 760 128G 6400 1440 29
APPENDIX: COMPATIBLE LIST WiFi Compatible Router List Brand Product Name ASUS RT-N53 BUFFALO WIR-HP-C300NH2 BUFFALO WZR-HP-G450 Cisco ERT120 D-Link DIR-816L Huawei WSR20 INTELBRAS WRN300 NETGEAR Wndr3700v4 NETGEAR WGR614 Tenda FS395 TP-link TL-WR941N 30
