User's Manual
- 7 -
•
Never throw them in re or water.
•
Do not carry or store batteries with other metallic objects. Doing so could cause batteries to short
circuit, leak or explode.
•
Never recharge a battery unless it is conrmed to be a rechargeable type.
Placing TV or Monitor
The unit supports a TV up to a maximum dimension
of 48 cm (W) x 22 cm (D) for its base and within a
maximum load of 35 kg.
Note:
Ensure the TV is positioned properly. Turning the
volume up too loud may cause the TV to vibrate and
fall over.
MAXIMUM WEIGHT LOADINGS:
• This Sound Stand is designed for use with TVs and
similar display devices of up to 35kg (max) which
use a base stand that spreads the weight across a
reasonably wide area of the Sound Plate.
• It is NOT suitable for use with heavy display devices
that use narrow legs to hold the screen vertically, as these stand types may concentrate excessive
force onto small areas of the Sound Plate.
Connections
Use the HDMI ARC Connection
The ARC (Audio Return Channel) function allows you to send audio from your ARC- compliant TV to your
sound bar through a single HDMI connection. To enjoy the ARC function, please ensure your TV is both
HDMI-CEC and ARC compliant and set up accordingly. When correctly set up, you can use your TV remote
control to adjust the volume output (VOL +/- and MUTE) of the sound bar.
- Ensure to use an HDMI cables that can support the ARC function.
HDMI-CEC will be called dierent names by dierent manufacturers - please refer to your owner’s
manual for details on setting up HDMI-CEC and ARC.
HDMI (ARC)
TV
- Connect the HDMI cable from unit's HDMI (ARC) socket to the HDMI (ARC) socket on your ARC
compliant TV. Then press the remote control to select HDMI ARC.