User's Manual

- 6 -
Remote Control
1
Switch the unit between ON and STANDBY mode.
2 SOURCE buttons
Select the play function.
3 Playback control buttons
•
H
/
G
Skip to previous track/skip to next track in Bluetooth
mode.
•
BF
/
PAIR
Play/pause/resume playback in Bluetooth mode.
Press and hold this button to activate the pairing
function in BLUETOOTH mode and disconnect the
existing paired Bluetooth device.
• VOL+/VOL-
Increase/decrease the volume level.
4 MUTE
Mute or resume the sound.
5 EQ buttons
Select a preset sound eect.
Preparations
Prepare the Remote Control
The provided Remote Control allows the unit to be operated from a distance.
•
Even if the Remote Control is operated within the eective range (6m), remote control operation may
be impossible if there are any obstacles between the unit and the remote control.
•
If the Remote Control is operated near other products which generate infrared rays, or if other remote
control devices using infra-red rays are used near the unit, it may operate incorrectly. Conversely, the
other products may operate incorrectly.
First-time use:
The unit has a pre-installed lithium CR2025 battery. Remove the protective tab to
activate the remote control battery.
Replace the Remote Control Battery
1 Pull out the battery tray and remove the old battery.
2 Place a new CR2025 battery into the battery tray
with correct polarity (+/-) as indicated.
3 Insert the battery tray back into the slot.
Precautions Concerning Batteries
•
When the Remote Control is not to be used for a long time (more than a month), remove the battery
from the Remote Control to prevent it from leaking.
•
If the batteries leak, wipe away the leakage inside the battery compartment and replace the batteries
with new ones.
•
Do not use any batteries other than those specied.
•
Do not heat or disassemble batteries.




