User's Manual

- 12 -
Loud hum or noise is heard
• The plugs and sockets are dirty. Wipe them with a cloth slightly moistened with an appropriate
non-abrasive cleaning solution.
The unit does not respond when pressing any buttons
• The unit may freeze up during use. Switch the unit o and then on again at the mains socket to reset
the unit.
No sound output
• Make sure that the unit is not muted. Press MUTE or VOL + to resume normal listening.
• Ensure the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to PCM
mode.
The sound output eect sounds unfamiliar
• Press the EQ button on the unit repeatedly or press the FLAT, TV, CINEMA, SONG buttons on the
remote control to select preset EQ mode for the optimal sound output eect.
I can't nd the Bluetooth name of this unit on my Bluetooth device for Bluetooth
pairing
• Ensure that the unit is switch on.
• Ensure that the Bluetooth function is activated on your Bluetooth device.
• The unit has a Bluetooth function that can receive a signal within 8 metres. Keep a distance within 8
metres between.
This is a 15 mins power o function, one of the ERPII standard requirement for saving power
• When the unit's external input signal level is too low, the unit will be turned o automatically in 15
minutes. Please increase the volume level of your external device.
Specications
General
Power requirements ........................................................................................................................ AC120V~ 60Hz
Power consumption ..............................................................................................................................................................30W
Output power RMS ........................................................................................................................................... 15W x 2 + 30W
USB Socket ......................................................................................................................................................5V==500mA Max
Total harmonic distortion ................................................................................................................................1% (1kHz, 1W)
Audio input sensitivity ...................................................................................................................................................500 mV
Frequency response ............................................................................................................................................ 40Hz - 20KHz
Dimension (W x H x D) ............................................................................................................................. 525 x 76 x 303 mm
Impedance ..................... ...................................................................................................................................... .....4Ω X 2 + 6Ω
Bluetooth
Version ...................................................................................................................................................................................... V 4.2
Maximum power transmitted ...................................................................................................................................<20 dbm
Frequency bands ................................................................................................................................ 2402 MHz ~ 2480 MHz
Remote Control
Distance ....................................................................................................................................................................................... 6m
Angle ............................................................................................................................................................................................. 30°
Battery Type ........................................................................................................................................................................CR2025