User's Manual

- 10 -
Select the Equaliser
- While playing, press the EQ button repeatedly on the unit or press the FLAT, TV, CINEMA, SONG
buttons on the remote control to select preset equalisers.
AUX / HDMI ARC / OPTICAL / COAXIAL Operation
- Ensure that the unit is connected to the TV or audio device.
1 Press the button repeatedly on the unit or press the AUX1, AUX2, HDMI ARC, OPTICAL, COAXIAL
buttons on the remote control to select the desired mode.
2 Operate your audio device directly for playback features.
3 Press the VOL +/– button to adjust the volume to your desired level.
Tip: While in HDMI ARC/OPTICAL/COAXIAL mode, if there’s no sound output and the status indicator is
ashing, you may need to activate PCM output on your source device (eg. TV, DVD or Blu-ray player).
BLUETOOTH Operation
You can listen to tracks from a media device if it is connected to the unit via Bluetooth.
Pair Bluetooth-enabled Devices
• The operational range between the main unit and a Bluetooth device is approximately 8 meters.
• Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth capabilities of
the device.
• Compatibility with all Bluetooth devices is not guaranteed.
• Any obstacle between this unit and a Bluetooth device can reduce the operational range.
• Keep this unit away from other electronic devices that may cause interference.
To connect your device to the unit via Bluetooth, follow the steps below:
1 During ON mode, press the button repeatedly on the unit or press the BT (Bluetooth) button to
select Bluetooth mode. The Blue indicator will ash slowly.
2 Activate your Bluetooth device and select the search mode. “IAN 288637” will appear on your
Bluetooth device.
• If you cannot nd the unit, press and hold the
BF
/
PAIR button on the remote control. The system
has entered pairing mode. You will hear "PAIRING" from the unit and the Blue indicator will ash fast.
3 Select “IAN 288637” in the pairing list. After the “Paired” voice prompt, the system is successfully
connected and the Blue indicator will light up solidly.
4 Play music from the connected device.
To disconnect the Bluetooth function, you can :
- Switch to another function on the unit.
- Disable the function from your Bluetooth device. The Bluetooth device will be disconnected from the
soundbar after the “Disconnected” voice prompt.
- Press and hold the
BF
/
PAIR button on the remote control.
Tips:
• Enter "0000" for the password if necessary.
• If there is an existing connection, press and hold the
BF
/PAIR button on the remote control to
re-activate the pairing mode, the existing connection will be interrupted, the Blue indicator will ash.