User's Manual

20 US-EN
1. Press and hold down the CLOCK button
19
for about 3 seconds.
2. Press the SET / RESET button
24
to switch
between the 12- and 24-hour clock dis-
play modes.
3. Press the CLOCK button to confirm your
settings. The language option flashes.
Tip: If you press and hold down the SET /
RESET button, you accelerate the process
and reach the desired value more quickly.
This quicker method can also be used for
making the following settings. If during
a period of 30seconds no buttons are
pressed, the LC display returns automati-
cally to the default display.
4. Press the SET / RESET button to set the
desired language (GE = German,
FR = French, SP = Spanish, IT = Italian,
EN = English).
5. Press the CLOCK button to confirm your
settings. The time zone display flashes.
6. Press the SET / RESET button to set the
desired time zone for time zone
(–8 hours to -5hours).
Note: Should you be in a country in
which the WWVB-Signal can be received
but the time is different to your current lo-
cal time, you can use the time zone set-
ting to have the clock display your
current local time. If you find yourself in a
country in which, for example, the local
time is an hour ahead of Pacific Standard
Time (PST), you set the time zone to –8.
284995_aur_Temperaturstation_content_US.indd 20 21.03.17 16:49