User's Manual

19 US-EN
Outdoor sensor
Mark the position of the hole (D 0.3 in /
7.7 mm) on the wall.
Note: Use the included drilling template
intended for marking the drill holes.
Drill the hole with an electric drill.
Insert the dowel
33
into the drilled hole.
Using a crosshead screwdriver, screw the
screw
32
into the dowel.
Hang the outdoor sensor by placing the
hanger
30
on the screw.
0.3in / 8mm
0.3 in/8 mm
Note: Ensure that the outdoor sensor should
not be immersed into water and not contact
with direct sunlight. Electronic devices may
adversely affect the wireless signal reception.
Setting the language / time
zone / time / date manually
The reception of WWVB radio signal where
the temperature station has been positioned
may become degraded or interrupted. If this
happens you can set the product manually.
284995_aur_Temperaturstation_content_US.indd 19 21.03.17 16:49