User's Manual

18 US-EN
DAMAGE! Read the operating and safety
instructions for your drill carefully.
DANGER TO LIFE!
Take care that you do not hit electricity, gas
or water lines when you drill into the wall. If
necessary, check with a pipe and cable de-
tector before drilling.
Temperature station
Note: Before mounting the temperature sta-
tion, please remove the stand
26
by simply
pulling it off.
Mark the position of the hole (D 0.3 in /
7.7 mm) on the wall.
Note: Use the included drilling template
intended for marking the drill holes.
Drill the hole with an electric drill.
Insert the dowel
28
into the drilled hole.
Using a crosshead screwdriver, screw the
screw
27
into the dowel.
Hang the temperature station by placing
the hanging slot
22
on the screw.
0.125in / 0.3mm
0.125 in/0.3 mm
284995_aur_Temperaturstation_content_US.indd 18 21.03.17 16:49