Safety Notes

US-EN 21
Charging mobile devices with the
power bank via the USB output ports
You can charge up to two devices at the same time using the
USB ports of the power bank
1
. If all outputs are used at the
same time, the sum of the output current must not exceed 3.0 A.
To charge your QuickCharge 3.0 enabled device, connect
the USB type A plug of the USB cable
7
or the original
charging cable of the device to be charged to the USB
type A (QC3.0) output
9
. Then connect the USB Type C
plug of the USB cable
7
to the Type C input of device to
be charged. The charging process will start automatically.
You could also charge your conventional USB devices from the
USB Type A output port
9
of the power bank
1
using the
included USB cable
7
or a USB Type A to micro USB cable
(not included).
To charge your USB Power Delivery (PD) enabled device,
connect the USB Type C plugs of your USB Type C to Type
C cable (not included) to the PD port
6
of the power
bank
1
and the PD port of the device to be charged. The
charging process will start automatically.
In case if the charging process does not begin immediately,
press the On/off button
3
briefly to begin the charging
process. The current battery status of the power bank
1
is
displayed during the charging process by the LED display
for battery capacity
5
.