Safety Notes
Table Of Contents
US-EN 19
Qi wireless charging
Put your Qi compatible device to be charged on the centre
of the Qi charging surface
2
of the power bank
1
.
Slightly adjust the charging position of the device to be
charged so that its charging surface is facing down to the
centre of the Qi charging surface
2
of the power bank
1
.
Briefly press the On/off button
3
to switch on the power
bank
1
. The wireless charging will then start automatically.
When Qi charging is active, Qi status indicator
4
flashes
blue*. The LED display for battery capacity
5
shows the
current charge status of the internal battery throughout the
wireless charging process.
If wireless charging does not start, move your device to be
charged more accurately to the centre of the Qi charging
surface
2
until the Qi status indicator
4
starts flashing.
While in idle status (standby mode), the Qi status indicator
4
will light blue*. The Qi status indicator
4
will go off if
no Qi compatible device is detected and idle for approx. 30
seconds.
When the charging process has finished (i.e. the mobile
device is fully charged) the Qi status indicator
4
will light
blue or flash blue in colour*.
The Qi status indicator
4
will go off when errors are
detected on the Qi charging surface
2
*. In this case,
remove your device and make sure that there are no
unwanted metallic objects between your device and the Qi
charging surface
2
and then try again.
To stop the wireless charging, take your device away from
the Qi charging surface
2
. The Qi status indicator
4
will
light blue(standby mode)*. If no Qi compatible device is