Users Manual Part 2

31 US-EN

TIP: Min / Max Temperature are measured from the history (after in-

serting batteries/connecting to power). To erase the stored Min / Max

Temperature, hold the MEM button

for 3 seconds.

Barometric Pressure History

Repeatedly brieﬂy pressing the SET / HISTORY button will display the

barometric pressure over the past 12 hours. The barometric pressure

ﬁeld

next to the barometric pressure display shows the history ,

indicating how many hours ago the barometric pressure is from.

Manually activating signal reception

Activating WWVB signal reception

Every night the main station synchronizes the internal clock with the

WWVB signal. However, you may also activate WWVB reception

manually. To do so, press and hold the DOWN /

button

for

3 seconds until the radio tower symbol

ﬂashes. When a signal is

received the radio tower symbol will be static. If reception fails, the

radio tower symbol

will disappear.

Activating reception from the outdoor sensor

The outdoor sensor will transmit a signal about twice a minute, which

is automatically received by the main station. However, you may also

manually activate reception of the signal. To do so, press and hold the

CH button

for three seconds until the channel symbol ﬂashes.

When a signal is received the symbol animation will disappear and

the transmitted temperature and humidity will appear in the display.

296586_1901_aur_Funk-Wetterstation_Content_US.indd 31 24.06.19 11:47