Users Manual Part 2

20 US-EN
Drill the hole with an electric drill.
Push the dowel
33
into the drilled hole.
Using a crosshead screwdriver, screw the screw
32
into the wall
anchor.
Hang the outdoor sensor by placing the hanging slot
19
on the
screw.
Note: Never immerse the outdoor sensor in water and protect
from direct sunlight. Electronic devices may adversely affect the
wireless signal reception.
0.125in / 0.3mm
0.125 in/3 mm
0.3 in/8 mm
Once the main station has received the signal from the outdoor sensor
and the WWVB signal, it enters into basic mode.
In base mode the main station will display the following information:
296586_1901_aur_Funk-Wetterstation_Content_US.indd 20 24.06.19 11:47