Users Manual Part 2

18 US-EN
If the signal is detected the clock display
24
will show the current
Central European Time, date and day of the week. A static radio
tower symbol
appears. For more details please refer to section
Basic Settings.
If the attempts to receive a signal fail the main station will stop atte mpting
to receive a signal after 7 minutes and the radio tower symbol
will
disappear. For information on how to resolve this issue please refer to
section Troubleshooting.
After successfully receiving the WWVB signal, press the UP button
8
to select the time zone display between P = Pacific UTC-8; M =
Mountain UTC-7, C = Central UTC-6, E = Eastern UTC-5 in the Clock
field
24
.
You may reactivate reception by pressing and holding the
DOWN /
button
9
for three seconds until a radio tower
symbol
in the clock display
24
becomes animated.
The time can also be set manually. For more details please refer
to section Basic Settings.
Wall-mounting the temperature station and / or the
outdoor sensor:
Note: This step requires an electric drill and a crosshead screwdriver.
DANGER TO LIFE, RISK OF INJURY AND PROPERTY
DAMAGE! Carefully read the instructions for use and safety
notes for your drill.
DANGER TO LIFE! Be careful that you do not hit electrical, gas
or water lines when drilling into the wall. If necessary, check the
wall with a wall scanner before drilling.
296586_1901_aur_Funk-Wetterstation_Content_US.indd 18 24.06.19 11:47