Users Manual Part 2

US-EN26
indicator
1
will flash up. The receiver
will now indicate the door signal
acoustically and optically. Press the
signal type selector button
4
again.
An acoustic signal will sound. The
receiver will now indicate the door
signal acoustically. Press the signal
type selector button
4
again. The
receiver will now indicate the door
signal optically.
When the battery of receiver is
drained, the signal indicator will
flash. You can replace the used
battery with a new one of the same
type.
Setting the volume
Press the volume button
3
until the
desired volume is reached. There
are a total of 4 possible volume set-
tings: very loud, loud, medium, soft.
326419_1901_silv_Wireless Tuerklingel_Content_US.indd 26 24.06.19 13:45