Operating Instructions

AHFL 433 B2
■ 22
│
US - EN
Switching the channel display on the weather station
When the weather station has received the signal from the out-
door sensor, it automatically shows the corresponding channel.
However, you can also manually set the display of the different
channels.
♦ Press the control surface
4 repeatedly to switch
between displays
(only show channel 1), (only
show channel 2),
(only show channel 3) and
(rotate between all channels in a loop).
Only the values from outdoor sensors that are connected to the
weather station are shown. If you use multiple outdoor sensors,
choose a different channel for each outdoor sensor.
IB_314696_AHFL433B2_WeatherStation_LB9.indb 22 26.03.19 14:40