Operating Instructions

AHFL 433 B2
US - EN
│
21 ■
Switching the channel
Switching the channel on the outdoor sensor
You can choose between 3 different channels. Channel 1 is set
by default.
♦ Open the battery compartment o on the back of the
device by removing the battery compartment cover p.
♦ Choose a channel by moving the channel switch i to
CH 1, CH 2 or CH 3.
♦ Press and hold the control surface
4 until the reception
icon
on the display field for outdoors 3 blinks.
♦ Press the TX button z to manually start the wireless signal
for the outdoor sensor. After the signal is received, the
temperature and humidity are shown in the display field
for outdoors 3on the new channel.
♦ Close the battery compartment o.
IB_314696_AHFL433B2_WeatherStation_LB9.indb 21 26.03.19 14:40