Operating Instructions

AHFL 433 B2
US - EN
│
17 ■
The display field for outdoors 3
The outside temperature is shown
with a precision of a tenth of a
degree. The temperature unit
(for degrees Fahrenheit) appears
on the right. You can also switch the temperature unit to
(degrees Celsius). If the outside temperature drops to ≤ 37.4 °F,
the frost warning icon appears.
If
appears, the station has detected a temperature below the
measurement range of –40 °F to 140 °F (–40 °C to 60 °C);
indicates this range has been exceeded. The relative humidity
(RH) measured by the outdoor sensor is shown in % above
the temperature display. In addition, the channel used by the
connected outdoor sensor is shown (e.g.
).
Basic settings
♦ Press and hold the control surface 5for about 3 seconds.
The hour indicator in the time display 2blinks.
♦ Press the control surface
4 or control surface 6 to
set the desired value.
♦ Press the control surface
5 to confirm your input.
The minute indicator in the time display 2blinks.
♦ Press the control surface
4 or control surface 6 to
set the desired value.
♦ Press the control surface
5 to confirm your input.
In the time display 2,
blinks.
♦ Press the control surface
4 or control surface 6 to
select the desired time format (24-hour or 12-hour format).
IB_314696_AHFL433B2_WeatherStation_LB9.indb 17 26.03.19 14:40