Operating Instructions
AHFL 433 B2
■ 12
│
US - EN
If no outside temperature or humidity is shown within approx.
3 minutes, the weather station stops searching for a signal. The
reception icon turns off and the display field for outdoors 3
shows and . The system likely cannot detect a signal due
to structural conditions or because the sensor is too far away.
If the device is unable to connect to the outdoor sensor automati-
cally, you can establish a connection manually:
♦ Press and hold the control surface
4 until the reception
icon on the display field for outdoors 3blinks.
♦ Press the TX button z to manually start the wireless signal
for the outdoor sensor.
The weather station automatically starts to receive the WWVB
signal after 3minutes, regardless of whether the outdoor sensor
reception search has been successful or not.
The reception icon
flashes on the time display2. If the recep-
tion icon is not flashing completely ( ) on the display, it means
that the reception of the WWVB signal is too weak and the time
cannot be synchronized. Try to find a set-up location where the
reception icon flashes completely ( ) on the display.
If the WWVB signal is being received correctly, the current Eastern
standard time (EST) is shown on the time display2. In addition,
the reception icon
is permanently shown on the time display2.
IB_314696_AHFL433B2_WeatherStation_LB9.indb 12 26.03.19 14:40