Operating Instructions

AHFL 433 B2
■ 10
│
US - EN
Figure B
Outdoor sensor
e Display
r Indicator LED
t Fixing lugs
z TX button
u °C/°F button
iChannel switch
o Battery compartment
p Battery compartment cover
aStand
First use
Before use, insert a battery first into the outdoor sensor and
then into the weather station.
Requirements at the setup location
► When selecting the setup location, make sure the devices are
not exposed to direct sunlight, vibration, dust, heat, cold or
humidity.
► Do not set up the device near sources of heat, e.g. heaters.
► Mount the outdoor sensor within a maximum radius of 164 ft
to the weather station. Make sure there are no interfering ob-
stacles between the outdoor sensor and the weather station.
Otherwise, there could be transmission interference.
IB_314696_AHFL433B2_WeatherStation_LB9.indb 10 26.03.19 14:40