Operating Instructions

AFT 77 B2
US - EN
│
19 ■
Operation and use
Basic settings
If the device is unable to synchronize with the WWVB signal, you can
also set the temperature station manually.
♦ To configure the basic settings, press and hold the
buttonq
for approximately 3 seconds. flashes on the time panel6.
♦ Press the
button0 or the buttonw to select the required
hour format (12- or 24-hour format).
♦ Press the
buttonq to confirm your entry. (time zone setting)
flashes on the time panel6.
♦ Press the button0 or the buttonw to set the desired time zone:
# Time zone
Pacific Standard Time (PST)
Mountain Standard Time (MST)
Central Standard Time (CST)
Eastern Standard Time (EST)
♦ Press the
buttonq to confirm your entry. The hour display
flashes on the time panel6.
♦ Press the
button0 or the buttonw to set the desired value.
♦ Press the
buttonq to confirm your entry. The minute display
flashes on the time panel6.
♦ Press the
button0 or the buttonw to set the desired value.
♦ Press the
buttonq to confirm your entry. The seconds display
flashes on the time panel6.
IB_345564_AFT77B2_Funk-Temperaturstation_LB9.indb 19_
345564_AFT77B2_Funk-Temperaturstation_LB9.indb 19
10.09.20 15:34
10.09.20 15:
3