Operating Instructions

AFT 77 B2
■ 10
│
US - EN
Figure B: Outdoor sensor
p Display
a Indicator LED
s Hook
d TXbutton
f °C/°Fbutton
g Battery compartment
h Battery compartment cover
j Stand
k Wall anchor
l Screw
First use
Before first use, insert the battery into the outdoor sensor and then
into the temperature station.
Requirements at the setup location
► For best selection of the setup location, make sure the devices are
not exposed to direct sunlight, vibration, dust, heat, cold, or humidity.
► Do not set up the device near sources of heat, e.g. heaters.
► Mount the outdoor sensor within a maximum radius of 328 ft from
the temperature station. Make sure there are no interfering obstacles
between the outdoor sensor and the temperature station.
Otherwise, there could be transmission interference.
♦ Both the temperature station and the outdoor sensor can be
suspended from a screw using the hooks z and s.
♦ Alternatively, you can fold out the standj of the outdoor sensor to
set it up on an even, horizontal surface.
IB_345564_AFT77B2_Funk-Temperaturstation_LB9.indb 10_
345564_AFT77B2_Funk-Temperaturstation_LB9.indb 10
10.09.20 15:34
10.09.20 15:
3