Operating Instructions

AFT 77 A1
US - EN
│
25 ■
Changing the radio channel display
on the temperature station
If the temperature station is receiving the out-
door sensor radio signal, it will automatically
display the corresponding channel.
However, you can also manually set the display
of various radio channels.
♦ Press the
button0 repeatedly to
switch between the displays CH1 (display
channel 1), CH2 (display channel 2), CH3
(display channel 3) and (display all
channels alternately in a loop).
Only the values from outdoor sensors that
are connected to the temperature station are
shown.
If you use multiple outdoor sensors, choose
a different channel for each outdoor sensor
IB_320042_AFT77A1_Funk-Temperaturstation_LB9.indb 25 08.03.19 09:30