Operating Instructions

AFT 77 A1
■ 10
│
US - EN
First use
Before use, insert the battery first into the
outdoor sensor and then into the tempera-
ture station.
Requirements at the setup location
► When selecting the setup location, make
sure the devices are not exposed to direct
sunlight, vibration, dust, heat, cold or
humidity.
► Do not set up the device near sources of
heat, e.g. heaters.
► Mount the outdoor sensor within a max-
imum radius of 98 ft to the temperature
station. Make sure there are no interfering
obstacles between the outdoor sensor and
the temperature station. Otherwise, there
could be transmission interference.
♦ Both the temperature station and the
outdoor sensor can be suspended from a
screw using the hooks 7 and t.
♦ Alternatively, you can fold out the
standsw/p of the temperature station
and the outdoor sensor to set them up on
an even, horizontal surface.
IB_320042_AFT77A1_Funk-Temperaturstation_LB9.indb 10 08.03.19 09:30