User's Manual

Librestream Onsight 1000/2000/2500 User Manual Audio/Video (AV) Functions
36
Î To set audio volume levels:
1. From the standard Viewfinder display window, press the Display button
three times (or until the Main
Menu appears).
2. Tap the Configuration option with the stylus to display the Configuration screen.
3. Select Audio and then select Volumes.
4. This screen allows you to control speaker volume and microphone mute, as well as ring volume and sidetone
volume. Note that if the microphone mute (
) checkbox is selected then both voice and subject audio are
muted.
5.3 Using S-Video
For the Onsight 2000/2500, the S-Video connection can be configured as either an input (to accept video from
another S-Video device) or an output (to provide video to another S-Video device). Most Onsight 1000 models
provide S-Video In only. For Onsight 1000 S-Video Out capability, please contact Librestream.
When using the S-Video input on the Onsight device make sure to connect
and power up the other video source before switching the Onsight device’s
Video Source setting to S-Video In.
For the Onsight 2000/2500, S-Video is only available on the I/O Sled
accessory. For more information on using the I/O Sled, see paragraph 1.7.3 on
page 10.