User's Manual

Librestream Onsight 1000/2000/2500 User Manual Answering & Initiating Calls
3.4 Ending a Call
Î To end a call:
1. Press the End button
.
Onsight Expert can also terminate the call from the Onsight Expert application.
3.5 VoIP Telephone Communication
Before using a headset with the Onsight 2000Ex/2500Ex, you
must read the Onsight 2000/2500 Regulatory and Safety Guide.
For conversation, the Onsight device can operate using its built-in microphone and speaker, or a headset:
Speaker phone – if a headset is not attached, the Onsight device operates as a speaker phone using its built-in
omni-directional microphone and speaker.
Headset – if you plug a headset into the headset connector the Onsight device uses the headset microphone and
speaker. This is useful in noisy environments or where privacy is a concern. In this case, Subject Audio continues
to use the built-in microphone or external audio line-in, if selected. When using a closed-ear headset, the
Headset Sidetone feature provides feedback to the user to ensure speaking volume is satisfactory. Main Menu >
Configuration > Audio > General enables the sidetone feature, and Main Menu > Configuration > Audio >
Volumes allows for sidetone volume adjustment.
Onsight 2000/2500 – Audio Line-in is only available on the I/O Sled accessory.
For more information on using the I/O Sled, see paragraph 1.7.3, I/O Sled, on
page 10.
If the operator needs to capture particular sounds as part of the video stream
(e.g., an odd noise being made by a piece of machinery), you can also set a
Subject Audio source, as described in paragraph 5.2, Setting the Subject
Audio Source
and Volumes, on page 34.
29