User's Manual

Librestream Onsight 1000/2000/2500 User Manual Getting Started
1.8.5 Main Menu
Access to the Main Menu is by using the Display Mode button
. The Main Menu is used for configuration and
other setup options.
Î To access the Main Menu:
1. Press and release the Display Mode
button three times.
2. The Main Menu appears with these selections.
3. To exit this menu, press and release the Display Mode button.
The Display Mode button cycles through additional display modes. See
section 4, Viewfinder Features & Display Modes, on page 30 for more
inform
ation.
1.8.6 Stylus
The stylu
s is used to select an icon or button, a menu item or keyboard character, or to view a pop-up message or
status screen. Simply tap the item with the stylus tip. For information screens or pop-up messages, tap the item
again to close it.
Tap the screen lightly. Do not press hard or strike the screen. Do not use other
objects, as this could damage the Viewfinder screen
The Onsight 2000/2500 device’s stylus has a screwdriver tip on one end. Do
not use the screwdriver tip to make any selections on the viewfinder. The
screwdriver tip is used for the I/O Sled, I/O Cover, and Power Sled, or for
opening the battery compartment.
15