User's Manual

Librestream Onsight 1000/2000/2500 User Manual Getting Started
1.7.3 I/O Sled
The I/O Sled is an optional accessory that is required in order to use the Audio-in, S-Video, and Ethernet features
of the Onsight 2000/2500.
Establish the Ethernet connection before powering on the Onsight 2000/2500.
Before using the I/O Sled with the Onsight 2000Ex/2500Ex, you
must read the Onsight 2000/2500 Regulatory and Safety Guide.
To attac
h the I/O Sled, insert into the I/O Connector of the Onsight device. Tighten the thumb screws with the
stylus screwdriver.
The parts of the I/O Sled accessory are as follows:
I/O Sled showing
cable management
Power pins (2)
I/O Connecto
r
10
Audio
Line-in
Powe
r
S-Video
Ethernet
USB
Tie strap loop (tie strap
not supp
lied)
Thumb screw
(
2
)
Cable slot