User's Manual

Librestream Onsight 1000/2000/2500 User Manual Getting Started
1.6.5 Zoom/Manual Focus Control
The Zoom buttons
are located on the back of the Onsight device, directly above the Navigation pad (see
Figure 5 on page 6). These allow the operator to set zoom levels
on the camera or to set focus manually.
The Manual Focus
button is located on the back of the Onsight device on the left side (see Figure 4 on page
5). To set the focus manually, see paragraph 5.6.2, Manual Focus, on page 38.
1.6.6 Indicators
Indicator Name Explanation
Power mode indicator Green = On or Standby
Network indicator Green = Connected to network
Off = Not connected to network
Battery/power indicator Orange = Battery is charging
Off = Battery is charged or power is not
connected
Stream/record Red = streaming/recording on
Off = streaming/recording off
Ethernet port Establish the Ethernet connection before
powering on the Onsight device. On the
Onsight 1000, the Ethernet port is on the
side. On the Onsight 2000/2500, the
Ethernet port is located on the I/O Sled
accessory.
The Ethernet port includes two LED
indicators.
Yellow On = a wired network link exists
Yellow Flashing = indicates wired network
activity
Yellow Off = no wired network link
Green On = 100 Mbps
Green Off = 10 Mbps
7