User's Manual

Librestream Onsight 2500 Regulatory and Safety Guide
1
1. Scope
This manual applies to the following models. References to MCD2500 in this manual,
apply to all the listed models below.
 MCD2500
 MCD2500n
2. General Safety Information
 Do not attempt to service or dismantle this equipment. All repairs must be done by
an authorized Librestream service depot.
 Contact support for an authorized Librestream service depot.
 Do not block or insert objects into any openings in the equipment. Doing so may
damage internal components and may cause fire or shock hazards.
 Carefully read the Librestream Quick Start Guide and the User manual before
operating the Onsight 2500, paying special attention to “Operating Environment” in
section 10.
 Use only a Librestream-supplied power adapter with the equipment. Use of other
adapters may cause fire or explosion hazards.
 Operate the external power adapter in a well ventilated area. Do not cover the
power adapter with papers or any other items as the adapter may become hot.
This symbol appears within this manual, as well as the User
Manual, Quick Start Guide, and on the product label. The symbol
means “Attention, consult ACCOMPANYING DOCUMENTS”.
This is a critical symbol and the user must refer to the
accompanying documents.
2.1. Battery
CAUTION! RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE OR INSTALLED INCORRECTLY.
 Observe the correct polarity when changing the lithium battery. Install battery
according to the manufacturer’s product documentation.
 Replace battery only with the same type as recommended by the manufacturer
 Dispose of used batteries according to the manufacturer’s product documentation
and local disposal requirements
 Use only Librestream-supplied batteries with the Onsight 2500. Use of other types
may increase the risk of fire or explosion or damage to the equipment.