User's Manual

Librestream Onsight 2500 Regulatory and Safety Guide
15
IEC 60601-1-2:2004(Ed 2.1) Table 204 Requirements
The equipment is intended for use in the electromagnetic environment specified
below. The customer or the user of the equipment should assure that it is used in
such an environment.
Immunity
test
IEC 60601
test level
Compliance
level
Electromagnetic
environment – guidance
Conducted RF
IEC 61000-4-6
3 Vrms
150 kHz to 80
MHz
3V
Radiated RF
IEC 61000-4-3
3 V/m
80 MHz to 2,5
GHz
3 V/m
Portable and mobile RF
communications equipment
should be used no closer to any
part of the equipment including
cables, than the recommended
separation distance calculated
from the equation applicable to
the frequency of the
transmitter.
Recommended separation
distance
where P is the maximum output
power rating of the transmitter
in watts (W) according to the
transmitter manufacturer and d
is the recommended separation
distance in meters (m). Field
strengths from fixed RF
transmitters, as determined by
an electromagnetic site survey
(a)
should be less than the
compliance level in each
frequency range
(b)
Interference
may occur in the vicinity of
other known RF transmitting
devices and equipment marked
with the following symbol: