User's Manual

Librestream Onsight 2500 Regulatory and Safety Guide
9
Hazardous Location General Information:
The MCD2500 is constructed with a Lexan polycarbonate housing and is overmolded
with a thermoplastic polyurethane elastomer.
Evaluation for material compatibility of the MCD2500 to actual end-user service
conditions is strongly recommended.
WARNINGS
 Carefully read all the provided manuals and documentation.
 Observe the rated operating and storage environment specifications.
 The I/O cover must be installed on the MCD2500 prior to entering the
potentially hazardous environment and it must remain installed at all times
while in the potentially hazardous environment. Ensure that the I/O
connector is clean and free of debris prior to installing the I/O cover. Every
time before entering the hazardous environment, ensure that the I/O cover
is fastened securely to the MCD2500 by hand-tightening the I/O cover’s
retention screws.
 The MCD2500 cannot be used with the AC power adapter or I/O sled within
the hazardous environment.
 WARNING - DO NOT OPEN BATTERY DOOR WHEN ENERGIZED. The
battery door must be securely closed within the hazardous environment.
 WARNING – DO NOT REMOVE OR INSTALL BATTERY IN THE
HAZARDOUS ENVIRONMENT.
 WARNING - DO NOT CHARGE IN HAZARDOUS AREA. Battery charging
is not permitted within the hazardous environment.
 AC power supply operation is not permitted within the hazardous
environment.
 WARNING - DO NOT REMOVE OR INSTALL SD CARD IN HAZARDOUS
AREA. The SD Memory Card Insertion and/or Removal are not permitted
within the hazardous environment.
 Inspect the camera before each use. The MCD2500 can not be used within
a hazardous environment if any damage is visible or if the device appears to
not operate correctly.
 At no time is the user allowed to use a device that has been disassembled
or assembled by anyone other then an authorized service representative.
 Do not attempt to service or dismantle this equipment. Service and
maintenance must be performed by an authorized service center.
 Librestream is the only approved authorized service center of MCD2500
devices for hazardous locations. For service please contact:
Librestream
895 Waverley St., Suite 110
Winnipeg, MB. Canada
R3T-5P4