User's Manual

LibreStream n_sight MCD2000 User Manual
31
see the System Administration manual for detailed information on MCD
configuration.
Tab Configuration Options Provided
General Adjust the standby timeout (amount of time before the
MCD will switch from On to Standby, if it is idle).
Specify the location of saved images and video
recordings, and Still Image Capture button mode.
Display Adjust the brightness of the viewfinder backlight or
recalibrate the touch panel.
Video Adjust the video settings of the camera and select the
video source (internal camera or external via S-Video
connector).
Audio Options for controlling volume and mute levels for the
speaker. You can set the maximum ring volume (the
volume will ramp up to this setting regardless of the
overall volume setting of the MCD) and request
voice/audio reduced bandwidth usage. This screen can
also be used to select the source for subject audio –
either the built-in microphone or the Audio line in
connector.
Network This screen allows you to adjust Network settings.
Please see the System Administration manual for
detailed instructions.
Radio Options to enable the radio and select radio channels.
SIP SIP server information necessary for registering this
device.
Security This screen allows you to set default login options and
import security certificates.
SNMP Options to configure the MCD for management by
Remote Maintenance Manager (RMM).
Time Follow on-screen instructions to adjust time and date
settings.
Version MCD version and copyright information. Software
updates may also be done from this screen (consult the
System Administrator’s Guide).
Maintenance Change user passwords and import contacts and users.
(Note that password changes are not forwarded to
other devices.)