Operation Manual

Figure 92: Area dialog – Colors page
Modifying colors
1) Select the object you wish to edit.
2) Go to Format > Area on the main menu bar, or click on the Area icon on the Line and
Filling toolbar, or right-click on the object and select Area to open the Area dialog.
3) Click on the Colors tab to open the Colors page.
4) Select the color to modify from the list.
5) Enter the new values that define the color in RGB or CMYK.
6) Modify the name as required.
7) Click Modify to save your changes.
8) Click OK to close the dialog.
Editing colors
1) Select the object you wish to edit.
2) Go to Format > Area on the main menu bar, or click on the Area icon on the Line and
Filling toolbar, or right-click on the object and select Area to open the Area dialog.
3) Click on the Colors tab to open the Colors page.
4) Select the color to edit from the list.
5) Click on the Edit button to open the Color Picker dialog (Figure 93).
6) Modify the color components as required using RGB, CMYK or HSB (Hue, Saturation,
Brightness).
7) Click OK to exit the Color Picker dialog.
8) Modify the name as required.
9) Click Modify on the Color dialog to save your changes.
10) Click OK to close the dialog.
Chapter 4 Changing Object Attributes 81