Operation Manual

Figure 26: Circles and Ovals toolbar
Figure 27: Customize dialog
1) Go to View > Toolbars > Customize on the main menu bar, or right-click in a blank area in
the Drawing toolbar and select Customize Toolbar from the context menu to open the
Customize dialog (Figure 27).
2) Select the Toolbars tab to open the Toolbars page of the Customize dialog.
3) Select Drawing from the Toolbar drop down list and click Add to open the Add Commands
dialog (Figure 28).
4) Select Drawing in the Category list.
5) Scroll down and select the second Ellipse command in the Commands list. Check the
Description section at the bottom of the dialog as this will indicate that you have selected
the command for the Circles and Ovals toolbar.
6) Click Add and then click Close.
7) In the Customize dialog, make sure the new Ellipse command is selected and checked.
8) For clarity, click Modify > Rename and type in Circles and Ovals as the new name for this
command, then click OK.
9) Use the up and down arrow buttons to move the new Circles and Ovals command to the
desired position on the Drawing toolbar.
10) Click OK to save the customized Drawing toolbar and close the Customize dialog.
36 LibreOffice 4.3 Draw Guide