Operation Manual

Printing a brochure
In Writer, Impress, and Draw, you can print a document with two pages on each side of a sheet of
paper, arranged so that when the printed pages are folded in half, the pages are in the correct
order to form a booklet or brochure.
Tip
Plan your document so it will look good when printed half size; choose appropriate
margins, font sizes, and so on. You may need to experiment.
To print a brochure on a single-sided printer:
1) Choose File > Print, or press Ctrl+P.
2) In the Print dialog, click Properties.
3) Check the printer is set to the same orientation (portrait or landscape) as specified in the
page setup for your document. Usually the orientation does not matter, but it does for
brochures. Click OK to return to the Print dialog.
4) Select the Page layout tab in the Print dialog.
5) Select the Brochure option.
6) In the Page sides section, select the Back sides / left pages option from the Include drop-
down list. Click OK.
Figure 287: Selecting which pages to print
Chapter 10 Printing, Exporting, E-mailing | 297