Operation Manual

Figure 196: Different types of area fill
Using styles
Suppose that you want to apply the same area fill, line thickness, and border to a set of objects.
This repetitive process can be greatly simplified by the use of styles. Styles allow you to define a
format (a style) and then apply that format to multiple objects. For more information on styles, see
Chapter 3 Using Styles and Templates in this guide, the Writer Guide Chapter 6 Introduction to
Styles, and the Draw Guide Chapter 4 Changing Object Attributes.
Positioning objects
Snap function
In Draw, objects can be accurately and consistently positioned using the snap function. Grid points,
snap points and lines, object frames, individual points on objects, or page edges can all be used
with the snap function.
Snap function is easier to work with at the highest zoom values that are practical for your display.
Two different snap functions can be used at the same time; for example snapping to a guide line
and to the page edge. It is recommended, however, to activate only the functions that you really
need.
For more detailed information about the snap function, see the Draw Guide Chapter 3 Working
with Objects and Object Points and Chapter 10 Advanced Draw Techniques.
Snap to grid
Use Snap to grid to position an object to a grid point. Go to View > Grid > Snap to Grid on the
Menu bar or click on the Snap to Grid icon on the Options toolbar to turn on or off the snap to grid
function. If the Options toolbar is not visible, go to View > Toolbars > Options on the Menu bar.
Figure 197: Positioning with snap to grid
Chapter 7 Getting Started with Draw | 211