User Manual
Table Of Contents
- 1. Introduction
- 2. Libre Wireless Technologies’ EVK
- 3. Firmware Upgrade
- 4. Network Configuration
- 5. Configuring Non-Volatile-Item
- 6. Features
- 6.1. Libre APP for Android
- 6.2. DDMS
- 6.3. Source Switching
- 6.4. Failsafe Mechanism
- 6.5. Software Security
- 6.6. Airplay®
- 6.7. Cast For Audio
- 6.8. Spotify Connect
- 6.9. AUX-In Support
- 6.10. USB Playback
- 6.11. DLNA ® / DMR
- 6.12. LUCI Over UART
- 6.13. Switch between Wired and wireless modes
- 6.14. TCP / IP Tunneling
- 6.15. Wi-Fi Scan Result
- 6.16. Device Name Configuration
- 6.17. Music Services
- 6.18. Telnet
- 6.19. Roon Music
- 7. Appendix
LS9 User Guide
Libre Wireless Technologies User Guide : LS9 / LS9AD, Ver. 5.3 Page 8 of 75
Libre Confidential
1. Introduction
Libre Wireless provides evaluation kit (EVK) for users to gain familiarity with our
products and expedite their own design and development. User can connect to LS9
module through USB, or wireless interface to configure the module, manage the on board
device on the module, and perform functional test.
Libre had delivered few LS9 sample modules with OLD Market ID (MID #01).
These modules should be returned back to Libre Sales team. Contact Libre Sale
Team to know more and swap the existing LS9 Modules.
Libre has stopped making firmware release matching to OLD MID. Upgrading any LS9
firmware to modules with OLD MID shall result in LS9 modules non-functional.
The NEW Market ID (MID #03) should only be used going forward. To Know the MID # in
the LS9-Module, check for the below log in the device terminal. On the device boot-up, in
the device terminal the below MID is printed. Below screen-shot is of the NEW MID# 03.
1.1. User Guide Insight
This document provides information on the procedures to be followed while using
LibreSync for various purpose such as,
Firmware update
Network Configuration
- WAC / SAC Method
- Webserver Method
o Web page method
o LS-Connect Method
o Manual Configuration Method
Configuring Non-Volatile Items