User Manual
Table Of Contents
- 1. Introduction
- 2. Libre Wireless Technologies’ EVK
- 3. Firmware Upgrade
- 4. Network Configuration
- 5. Configuring Non-Volatile-Item
- 6. Features
- 6.1. Libre APP for Android
- 6.2. DDMS
- 6.3. Source Switching
- 6.4. Failsafe Mechanism
- 6.5. Software Security
- 6.6. Airplay®
- 6.7. Cast For Audio
- 6.8. Spotify Connect
- 6.9. AUX-In Support
- 6.10. USB Playback
- 6.11. DLNA ® / DMR
- 6.12. LUCI Over UART
- 6.13. Switch between Wired and wireless modes
- 6.14. TCP / IP Tunneling
- 6.15. Wi-Fi Scan Result
- 6.16. Device Name Configuration
- 6.17. Music Services
- 6.18. Telnet
- 6.19. Roon Music
- 7. Appendix
LS9 User Guide
Libre Wireless Technologies User Guide : LS9 / LS9AD, Ver. 5.3 Page 51 of 75
Libre Confidential
Figure 6.14-1: Device Name Section
The device name length can be up-to maximum of 50 characters.
After the Firmware upgrade, if the device friendly name is not set, the device
name is listed as below
- iTunes server and DMR Speakers lists the device as LibreSync_xxxxxx
End--
6.17. Music Services
This section is applicable for Non-TZ modules, without GCast enabled in
it.
vTuner
vTuner is an internet radio device that receives and plays streamed media, either from
Internet radio or Home network.
vTuner on Libre platform can be used to stream music using the Libre APP.
To stream music from vTuner proceed as below.
Step 4. In the Now Playing screen of Libre APP, Tap Sources