User Manual
Table Of Contents
- 1. Introduction
- 2. Libre Wireless Technologies’ EVK
- 3. Firmware Upgrade
- 4. Network Configuration
- 5. Configuring Non-Volatile-Item
- 6. Features
- 6.1. Libre APP for Android
- 6.2. DDMS
- 6.3. Source Switching
- 6.4. Failsafe Mechanism
- 6.5. Software Security
- 6.6. Airplay®
- 6.7. Cast For Audio
- 6.8. Spotify Connect
- 6.9. AUX-In Support
- 6.10. USB Playback
- 6.11. DLNA ® / DMR
- 6.12. LUCI Over UART
- 6.13. Switch between Wired and wireless modes
- 6.14. TCP / IP Tunneling
- 6.15. Wi-Fi Scan Result
- 6.16. Device Name Configuration
- 6.17. Music Services
- 6.18. Telnet
- 6.19. Roon Music
- 7. Appendix
LS9 User Guide
Libre Wireless Technologies User Guide : LS9 / LS9AD, Ver. 5.3 Page 49 of 75
Libre Confidential
Step 4. Connect the device with an Ethernet cable
Step 5. Click Save
LS module reboots automatically
End--
Switching to Wireless Mode
To switch to wireless mode from wired mode proceed as below
Step 1. Execute command #netcfg in the device terminal to know the device IP
For Example, 192.168.0.103
Step 2. Enter the IP in the address bar of your browser with port number
For Example, 192.168.0.103
Step 3. In Select Your Network drop-down list, select Switch to Wi-Fi mode and
Click Save
Figure 6.11-2: Switch to Wi-Fi Mode
LS module reboots automatically.
End--