User Manual
Table Of Contents
- 1. Introduction
- 2. Libre Wireless Technologies’ EVK
- 3. Firmware Upgrade
- 4. Network Configuration
- 5. Configuring Non-Volatile-Item
- 6. Features
- 6.1. Libre APP for Android
- 6.2. DDMS
- 6.3. Source Switching
- 6.4. Failsafe Mechanism
- 6.5. Software Security
- 6.6. Airplay®
- 6.7. Cast For Audio
- 6.8. Spotify Connect
- 6.9. AUX-In Support
- 6.10. USB Playback
- 6.11. DLNA ® / DMR
- 6.12. LUCI Over UART
- 6.13. Switch between Wired and wireless modes
- 6.14. TCP / IP Tunneling
- 6.15. Wi-Fi Scan Result
- 6.16. Device Name Configuration
- 6.17. Music Services
- 6.18. Telnet
- 6.19. Roon Music
- 7. Appendix
LS9 User Guide
Libre Wireless Technologies User Guide : LS9 / LS9AD, Ver. 5.3 Page 33 of 75
Libre Confidential
Step 3. In Select Your Network section, Select the Access Point (AP) to be
connected, from Select your Network drop-down list and Click Save
End --
You can also connect the device to the network of your choice by setting the Static IP for
the device from the device web page.
Static IP address is a known IP address pre-allocated to the device. Static IP does not
change and the device will have the same IP always.
Step 1. Select the Access Point from Select Your Network drop-down list.
Step 2. Enable Static IP ON / OFF settings.