User's Manual

LS9 User Guide
Libre Wireless Technologies User Guide: LS9, Ver. 3.3.1 Page 30 of 93
Libre Confidential
In Select Your Network section, Select the Access Point (AP) to be
connected, from Select your Network drop-down list and Click Save
End --
4.2.3 Manual Configuration Method
To connect the device to the network manually proceed as below.
In Select Your Network section, enable Configure Manually
Enter the Access Point SSID and Click Save.
Device reboots and connects to the network.
To know the newly acquired IP execute command
#netcfg in the
device terminal